Emotiva XDA-1 User Manual download pdf (Page 12)

Page 8

XDA-2

4. Dim Button

Dims the illumination on the VFD (vacuum uorescent display) and the halo illumination on

the front panel buttons in several steps.

5. Standby Button

When the rear panel AC Power switch is On, press this button to switch the XDA-2 On;

press it again to return to Standby. You may also switch the XDA-2 using the On and

Standby buttons on the remote control. When the XDA-2 is On, the VFD and the halos

around the other buttons will be illuminated.

Note: The Standby button is black (all the other buttons are silver), so it can be

somewhat difcult to see in a dim room.

Note: The rear panel AC Power switch must be on for the XDA-2 to operate. If the rear

panel AC power switch is Off, the XDA-2 will not respond to either the front panel

controls or the remote control.

6. IR Sensor Window

The IR receiver for signals from the remote control is located behind this window.

(It looks like a button but it is not.)

7. VFD (vacuum fluorescent display)

By default, the VFD displays the current Volume setting (when there are headphones

plugged in, it displays the headphone Volume; when no headphones are plugged in, it

displays the main volume). The VFD also indicates when Mute is engaged (the word Mute

blinks in the display), and momentarily displays the sample rate when a new incoming

digital signal is detected. The VFD also momentarily indicates when the ASRC is engaged

and disengaged (the VFD will display ASRC On when the ASRC is engaged and ASRC

Bypass when the ASRC is disengaged).

8. Input Selector Buttons

Pressing each button selects the associated Input, and the LED above the button

illuminates to show that the input is selected.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

No comments

Emotiva XDA-1 User Manual Page 12